Burst Pipes Aftermath and Getting Started with Water Damage Restoration Work
If your home has had a problem with burst pipes, there is restoration work that needs to be completed. Sometimes, the damage that was caused by the pipes could be extensive and throughout your home. Therefore, you want to know where to start with the demolition, restorations, and improvements to prevent future problems. The following water damage information will help you with the restoration work that needs to be done after pipes have burst in your home:
1. Start By Stopping Water From Getting In
The first thing that needs to be done is stopping the water from getting into your home. Several things can be done to relieve pressure from water lines and stop the water from getting in, which include:
- Turn off the main water line
- Open faucets and flush toilets in the affected areas
- Punch holes in ceilings if the problem is an overhead pipe
Do these things to stop the water from getting in by relieving water pressure from the lines in affected areas of your home.
2. Remove the Standing Water and Locate Hidden Moisture
There are many areas of your home where there may be problems with standing water and moisture that needs to be removed. These areas where there may be standing water and moisture include wall crevasses, utility closets, low spots in floors, cabinetry, and woodwork. These areas are often places where standing water and moisture can cause problems if you do not address the issues when doing the demolition and cleaning for water damage restorations.
3. Begin Demolition of the Most Damaged Drywall Materials
The most damaged drywall materials will need to be removed when you are doing demolition and removing moisture from your home. Any drywall that is swollen due to absorbing water and moisture will need to be removed. This does not have to be done cleanly because the drywall can be cut and removed neatly later. Now, just try to remove materials that have absorbed a lot of moisture to prevent serious problems with mold and contamination.
4. Drill Holes to Allow Water to Escape and Dry Out Your Home
There are some areas where there may be water and moisture that gets trapped. Therefore, you may want to use a drill bit to puncture holes in areas where there may be water that is still trapped in voids of walls, woodwork, and other finishes. In addition, you are going to want to begin drying your home with fans and by opening windows and doors. It is better to try to dry things out on sunny days with lower humidity.
These are some of the things that you will need to do to deal with the water damage restorations that need to be done after pipes burst. If you are trying to get your home back together after a major plumbing problem like bursting pipes, contact a water damage restoration service for help with the repairs.
Share